High Temp EP Grease

Omni Specialty Packaging
HIGH TEMP EP GREASE
DESCRIPTION:
High Temp EP Grease is a lithium complex grease of the highest quality made from natural fatty acids,
highly refined mineral oils and additives. High Temp EP Grease is extreme pressure grease for a wide
variety of applications and severe operating environments. It is recommended as a chassis and wheel
bearing lubricant for automobiles and trucks equipped with disc brake wheel bearings. High Temp EP
Grease has a high level of chemical stability and offers excellent protection against rust and corrosion.
FEATURES/BENEFITS:
• High temperature capability
• Good water resistance
• Excellent rust protection
• Superior oxidation resistance
• Smooth consistency with minimal oil loss
• Design for high operational temperature
• Good pump ability
• High mechanical stability
• Extreme pressure characteristics
• High retention test bearing (stickiness)
APPLICATIONS:
High Temp EP Grease is recommended for industrial and automotive antifriction bearings, chassis
components, universal joints and disc brake wheel bearings operating under normal service conditions to
severe. It is especially recommended where loads are high, including the occasional crash on equipment
charge and the operational temperature is high. Due its texture and excellent pumpability, is
recommended for centralized systems, because of its high resistance to water washing is recommended
for applications where equipment is exposed to water contamination and can also be applied when the
gearbox operating conditions and design permit.
.
Meets Performance Requirements:
• GM 1051344
• GM 4733-M
• GM 6031-M
• Chrysler MS3701
• MACK GC-G
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER GREASE FOR YOUR EQUIPMENT.
HT GREASE 7-22-2015 REV 2
Omni Specialty Packaging
TYPICAL TEST DATA
Test Typical Results
NLGI Certification GC/LB
NLGI Grade, ASTM D217 2
Thickener type, ASTM D128 Complex Lithium
Color Red
Appearance (texture) Smooth; Slight Tack
Work penetration at 60 strokes 1/10 mm 25 ºC,
ASTM D217
265-295
Timken OK Load, ASTM D 2509, lb (Minimum) 50
Four-Ball Wear Test, ASTM D 2266, scar
diameter, mm
0.45
Four-Ball EP, ASTM D 2596, Weld Load, kg 315
Mechanical stability % loss, ASTM D217 10 max
Dropping point ºC/°F, ASTM D2265 240°C / 464 °F min
Water washout at 80 ºC %loss, ASTM D1264 5 max
Oil separation %w, ASTM D6184 5 max
Leakage Tendencies of Automotive Wheel
Bearing Greases, gr, ASTM D1263
5 max
Corrosion preventing properties, ASTM D1743 Pass
Oxidation stability at 100 hrs., psi, ASTM D942 15 max
Base oil viscosity at 40 ºC cSt, ASTM D445 220
Additive Type, IR EP,R&O
Typical test data are average values only. Minor variations which do not affect product performance are to be expected
during normal manufacturing.
HT GREASE 7-22-2015 REV 2