Multi-Purpose Grease

Omni Specialty Packaging
MP EP GREASE 6-16-2014 REV 1
MULTI-PURPOSE EP GREASE
DESCRIPTION:
Pure Guard Multi-Purpose EP Grease is general purpose lubricant grease made with minerals base
oils, lithium soap and antioxidant additives that give rust preventive special features such as multipurpose grease performance, suitable to be used in several automotive and industrial applications.
FEATURES/BENEFITS:
• Good load carrying capability
• Excellent rust protection
• Superior oxidation resistance
• Smooth consistency with minimal oil loss
• Good pump ability
• Excellent mechanical stability
• Drip temperature above 180 ° C
• Operating temperature up to 135 ° C
• Resistance to oil bleeding
• Good resistance to water washout
APPLICATIONS:
Pure Guard Multi-Purpose EP Grease Lubrication of bearings and automotive bearings, agricultural
and industrial water pumps, universal joints, chassis points for passenger trucks, buses, tractors and
mobile equipment, can be used in general construction and where required a lithium base grease
resistance characteristics to oxidation and corrosion.
Due its multi-purpose grease capacity often eliminates the need for additional greases, avoiding damage
by mixing different types of greases.
Meets Performance Requirements:
• GM 4733-M
• GM 6031-M
• Chrysler MS3701
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER GREASE FOR YOUR EQUIPMENT.
Omni Specialty Packaging
MP EP GREASE 6-16-2014 REV 1
TYPICAL TEST DATA
Test Typical Results
NLGI Certification LB
NLGI Grade, ASTM D217 2
Thickener type, ASTM D128 Lithium
Color Amber
Appearance (texture) Smooth
Work penetration at 60 strokes 1/10 mm 25 ºC,
ASTM D217
265-295
Timken OK Load, ASTM D 2509, lb (Minimum) 40
Four-Ball Wear Test, ASTM D 2266, scar
diameter, mm
0.5
Four-Ball EP, ASTM D 2596, Weld Load, kg 250
Mechanical stability % loss, ASTM D217 10 max
Dropping point ºC/°F, ASTM D2265 180°C / 356°F min
Water washout at 80 ºC %loss, ASTM D1264 5 max
Oil separation %w, ASTM D6184 5 max
Leakage Tendencies of Automotive Wheel
Bearing Greases, gr, ASTM D1263
5 max
Corrosion preventing properties, ASTM D1743 Pass
Oxidation stability at 100 hrs., psi, ASTM D942 15 max
Base oil viscosity at 40 ºC cSt, ASTM D445 220
Additive Type, IR EP,R&O
Typical test data are average values only. Minor variations which do not affect product performance are to be expected during
normal manufacturing.