No Sheen 68

Omni Specialty Packaging
F-227 7-3-2014 REV 1
NO SHEEN 68
DESCRIPTION:
No Sheen 68 premium antiwear hydraulic oil specifically designed for use in areas sensitive to leaks
and/or incidental discharge to the environment. No Sheen 68 is made from severely hydrotreated
base stocks and an ashless (zinc-free) additive system that provides superior oxidation stability, water
demulsibility, foam suppression and protection against wear, rust and corrosion. No Sheen 68 is
considered inherently biodegradeable. No Sheen 68 has a dielectric strength above 35kV and is nonconductive.
FEATURES/BENEFITS:
• Excellent oxidation stability means long service life and cost savings
• Outperforms other fluids in high efficiency (high temperature, high output) applications where
severe stress conditions are placed on the hydraulic fluid
• Exemplary antiwear properties which provide the best in wear protection
• Inherently more environmentally friendly thus minimizing any long term environmental concerns.
• Suitable for conventional recycling programs unlike vegetable hydraulic oils
• Aromatic-free and have passed the U.S. Coast Guard static sheen test requirements
• Exceeds the U.S. EPA LC-50 test requirements for mysidopsis-bahia shrimp, rainbow trout and
fathead minnow.
• Passes the Static Sheen Test (40CFR 435 Subpart A Appendix 1)
APPLICATIONS:
No Sheen 68 is designed to use in mobile and stationary hydraulic vane, piston, and gear type pumps
that are situated in environmentally sensitive areas. They are particularly suited to high performance
industrial applications which utilize axial piston pumps and pressures may exceed 10,000 psi. No
Sheen 68 meets the performance requirements of traditional antiwear hydraulic oils, particularly in
severe, high output applications such as axial piston pumps.
Meets Performance Requirements:
• DENSION HF-0 (T6H20C HYBRID PUMP TEST, DRY & WET), HF-1, HF-2
• DIN 51 524, PART 1&2
• EATON VICKERS I-286-S, M-2950-S
• AFNOR NFE 48603 (HM)
• US STEEL 127, 136
• CINCINNATI MACHINE P-68, P-69, AND P-70
• GENERAL MOTORS LH-04-1, LH-06-1, LH-15-1
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER FLUID FOR YOUR EQUIPMENT.
Omni Specialty Packaging
F-227 7-3-2014 REV 1
TYPICAL TEST DATA
ISO GRADE 68
Specific Gravity @ 60 ºF 0.8703
Viscosity, Kinematic
cSt at 40ºC Min/Max
cSt at 100ºC
61.2 – 74
.89.1
Viscosity Index 104
Flash Point, ºF 437
Pour Point, ºC (ºF) -19 (-2)
Color BLUE
Oxidation Stability, Hours to 2.0 AN,
ASTM D 943 15000+
Four-Ball Wear, ASTM D 2266
Scar, mm at 20 Kg .30
Scar, mm at 40 Kg .37
FZG Load Stage, Pass DIN 51354 12
Water Separation, ASTM D 1401,
minutes
at 130°F 15
Typical test data are average values only. Minor variations which do not affect product performance are to be expected
during normal manufacturing.