Synthetic Blend SAE 10W30 SN Plus

Omni Specialty Packaging
F-28 8-14-2018 REV 7
SYNTHETIC BLEND SAE 10W30 SN PLUS
DESCRIPTION:
SAE 10W30 Motor Oil provides high quality engine protection under all driving conditions and is
specifically formulated to provide extra protection against the harmful effects of city driving, where cars
undergo a higher stress due to constant stopping and going.
SAE 10W30 Motor Oil low friction formula helps improve gas mileage for long engine life and helps
protect against rust, corrosion, startup wear, varnish build-up, and eliminates the need for extra oil
additives. It also protects against thermal breakdown which helps prevent stuck rings. Specially
formulated to protect high compression gasoline direct injection engines from the occurrence of Low
Speed Pre-Ignition (LSPI) and Timing Chain Wear.
FEATURES/BENEFITS:
• Combats Low Speed Pre-Ignition (LSPI)
• Protects engines under all driving conditions
• Lowers friction and improves gas mileage
• Provides longer engine life
• Protects against rust, corrosion and varnish
• Resists thermal break-down
APPLICATIONS:
SAE 10W30 Motor Oil meets requirements of API SN PLUS. SAE 10W30 Motor Oil meet or exceed
the demanding requirements of International Lubricant Standardization and Approval Committee (ILSAC)
GF-5 (Use ILSAC GF-5 where GF-1 through GF-4 are recommended). ILSAC GF-5 comprises the latest
standard for passenger car, van, light truck and sport utility vehicles motor oils. This product is also
recommended for older engines, which owner’s manual calls for API SN PLUS, SN, SM, SL, SG, SF/RC,
SF Service Classifications or any combination thereof. Viscosity recommendations vary according to
temperature and engine manufacturer.
Meets the following requirements:
• Chrysler MS-6395, MS-6395V
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER FLUID FOR YOUR EQUIPMENT.
TYPICAL TEST DATA
SAE GRADE 10W30
Specific Gravity, (60°F) 0.8644
Viscosity, @ 40°C, cSt 65.0
Viscosity, @ 100°C, cSt 10.2
Viscosity Index 143
Cold Crank, cP at -25°C 4,400
Noack Volatility, % 11
HighTemp/HighShear, cP at 150°C 3.1
Flash Point, °F 457
Pour Point, °C (°F) -30 (-22)
Color 2.5
Phosphorus, wt% 0.078
Omni Specialty Packaging
F-28 8-14-2018 REV 7
Zinc, wt% 0.089
Typical test data are average values only. Minor variations which do not affect product performance are to be expected
during normal manufacturing.