Synthetic Blend SAE 5W20 SN Plus

Omni Specialty Packaging
F-97 8-14-2018 REV 7
Synthetic Blend SAE 5W20 SN PLUS
DESCRIPTION:
SAE 5W20 Motor Oil provides high quality engine protection under all driving conditions and is
specifically formulated to provide extra protection against the harmful effects of city driving, where cars
undergo a higher stress due to constant stopping and going.
SAE 5W20 Motor Oil low friction formula helps improve gas mileage for long engine life and helps protect
against rust, corrosion, startup wear, varnish build-up, and eliminates the need for extra oil additives. It
also protects against thermal breakdown which helps prevent stuck rings. Specially formulated to protect
high compression gasoline direct injection engines from the occurrence of Low Speed Pre-Ignition (LSPI)
and Timing Chain Wear.
FEATURES/BENEFITS:
• Combats Low Speed Pre-Ignition (LSPI)
• Protects engines under all driving conditions
• Lowers friction and improves gas mileage
• Provides longer engine life
• Protects against rust, corrosion and varnish
• Resists thermal break-down
APPLICATIONS:
SAE 5W20 Motor Oil meets requirements of API SN PLUS. SAE 5W20 Motor Oil meets or exceeds the
demanding requirements of International Lubricant Standardization and Approval Committee (ILSAC)
GF-5 (Use ILSAC GF-5 where GF-1 through GF-4 are recommended). ILSAC GF-5 comprises the latest
standard for passenger car, van, light truck and sport utility vehicles motor oils. This product is also
recommended for older engines, which owner’s manual calls for API SN PLUS, SN, SM, SL, SG Service
Classifications or any combination thereof. Viscosity recommendations vary according to temperature
and engine manufacturer. Suitable for Toyota, Honda, and Mazda.
Meets the following requirements:
• GM 6094M (for GM vehicles produced prior to 2011)
• Chrysler MS6395
• Chrysler MS6395V
• Ford WSS-M2C945-A
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER FLUID FOR YOUR EQUIPMENT.
TYPICAL TEST DATA
SAE GRADE 5W20
Specific Gravity, (60°F) 0.8588
Viscosity, @ 40°C, cSt 48.75
Viscosity, @ 100°C, cSt 8.37
Viscosity Index 147
Cold Crank, cP at -30°C 5,300
Noack Volatility, % 12
HighTemp/HighShear, cP at 150°C 2.7
Flash Point, °F 442
Pour Point, °C (°F) -42 (-44)
Omni Specialty Packaging
F-97 8-14-2018 REV 7
Color 2.5
Phosphorus, wt% 0.078
Zinc, wt% 0.089
Typical test data are average values only. Minor variations which do not affect product performance are to be expected
during normal manufacturing.