XL-6000 AW Hydraulic Oil 100

Omni Specialty Packaging
F-110 4-4-2019 REV 3
XL-6000 AW 100
DESCRIPTION:
XL-6000 AW 100 Hydraulic Oil is a premium quality antiwear hydraulic fluid designed to provide
optimal protection in high pressure applications. XL-6000 AW 100 Hydraulic Oil is formulated to
provide rust protection as well as foam inhibition. XL-6000 AW 100 Hydraulic Oil has excellent
oxidation resistance and provides superior antiwear protection. XL-6000 AW 100 Hydraulic Oil has a
dielectric strength above 35kV and is non-conductive.
FEATURES/BENEFITS:
• Typically 6,000 hours drain interval
• Specifically designed to maximize protection to hydraulic pump and their parts
• Formulated with highly refined, high viscosity index base stocks
• Provide excellent demulsibility and rust protection
• Antiwear additives create a protective film on metal surfaces
• Helps minimize metal to metal contact that is most severe in vane and gear pumps
• Minimum viscosity changes over a wide range of temperatures
• Superior filterability is provided with excellent thermal and hydrolytic stability thus preventing the
formation of deposits which may interfere with filtration in equipment that has close tolerances.
APPLICATIONS:
XL-6000 AW 100 Hydraulic Oil is recommended for hydraulic systems that have vane, piston or gear
type pumps and particularly where pressures exceed 1000 psi.
XL-6000 AW 100 Hydraulic Oil can also be used to lubricate lightly loaded reciprocating compressors
and as general purpose shop lubricants for motors and bearings. XL-6000 AW 100 Hydraulic Oil
meets all major pump manufacturers’ requirements.
Meets Performance Requirements:
• ASTM D6158 HL, HM, & HV
• Bosch Rexroth RDE 90220 and RDE-90235
• Chinese standard GB 11118.1 L-HL & L-HM High- pressure and General
• Danieli 0.000.001 Type 10 & 11
• DIN 51524 PART 1,2, & 3
• Eaton Brochure 03-401-2010
• Eaton Lubricant Specification E-FDGN-TB002-E
• Fives Cincinnati P-68, P-69 & P-70
• GM LS-2 Antiwear Hydraulic Oil
• ISO 11158 HL, HM, & HV
• JCMAS HK P041
• Parker Denison HF-1, HF-2, & HF-0
• SAE MS1004
• SWEDISH STANDARD SS 155434:2015
• U.S. Steel 126
• ZF TE-ML 07H, ZF TE-ML 21M
• Vickers M-2950 & I-286-S
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER FLUID FOR YOUR EQUIPMENT.
Omni Specialty Packaging
F-110 4-4-2019 REV 3
TYPICAL TEST DATA
ISO GRADE 100
Specific Gravity @ 60 ºF 0.8778
Viscosity, Kinematic
cSt at 40ºC Min/Max 90 – 110
Viscosity, Kinematic
cSt at 100ºC 11.6
Viscosity Index 101
Flash Point, ºF 410
Pour Point, ºC (ºF) -15 (5)
Color, Max 4.0
Oxidation Stability, Hours to 2.0
AN, ASTM D 943, Min 6000
Zinc, ppm 889
Typical test data are average values only. Minor variations which do not affect product performance are to be expected
during normal manufacturing.